PAX Ampullarium XL POS Clip-In - 3.0
SKU:
The ampoule holder XL Clip-In module is designed to fit the PAX organising system and is based on the XL module. The PAX Clip-In system is mounted in the base and lid and fitted with PAX ampoule clips as required.
PAX Ampullarium XL POS Clip-In - 3.0
SKU:
The ampoule holder XL Clip-In module is designed to fit the PAX organising system and is based on the XL module. The PAX Clip-In system is mounted in the base and lid and fitted with PAX ampoule clips as required.
Non Disponibile
PAX Ampullarium XL POS Clip-In - 3.0
The ampoule holder XL Clip-In module is designed to fit the PAX organising system and is based on the XL module. The PAX Clip-In system is mounted in the base and lid and fitted with PAX ampoule clips as required. The centre wall, which can be attached in the middle or on the opposite side, holds the syringes and cannulas and also protects the ampoules from excessive external pressure.
This ampoule holder is equipped with Velcro strips. The number of ampoules that can be stored varies between 72 and 200, depending on the configuration and desired clarity.
Consisting of:
15 x PAX clip-in system ampoule clip S 3.0
15 x PAX clip-in system ampoule clip M 3.0
10 x PAX clip-in system ampoule clip L 3.0
10 x PAX clip-in system ampoule clip XL 3.0
2 x PAX Clip-In System carrier plate XL
Dimensioni
| Tempi di consegna | 3- 4 Werktage bei Verfügbarkeit |
|---|---|
| Colore | grigio |
| Materiale | PAX-Rip-Tec |
| larghezza | 33 cm |
| Höhe in cm | 10 cm |
| Tiefe in cm | 24 cm |
Dimensioni
Prodotti simili
