PAX Wasserkuppe L-FT2
The standard emergency backpack for the emergency services with 2 front pockets compatible with the POS system, without side pockets. The standard central partition is designed for intubation equipment.
|day bright yellow||PAX-Plan|
- Kombination mit PAX-Organizing-System (POS)
- Incl. weld inner pounch: Set 3
- Product is fully reinforced and padded
- The shoulder straps can be removed if necessary
The Wasserkuppe with two front pockets
For the Wasserkuppe L-FT2 we have extended our base model with two generous front pockets. You can use this Wasserkuppe as a 2-backpack system and organise it clearly and variably. The removable centre wall module is designed for intubation. We supply the Wasserkuppe L-FT2 with nine transparent inside pockets. It is POS-compatible, and you can choose between different materials.
Flat neck brace compartment on the front
On the front of the Wasserkuppe L-FT2 we have integrated a very long, flat compartment in which you can accommodate a neck brace (however, this sometimes leads to damage of the material, depending on the manufacturer of the neck brace). Behind this compartment you access the separate document compartment via a side zipper.
Good body with brains - and a lot of rubber loops
The body of this backpack shows its true organisational talent. You can arrange the included inside pockets freely and easily within the body. The velcro strips sewn inside the back keep them securely in place. All around the body frame we have attached wide rubber band loops. With these you can stow masks for example. If necessary, you can remove the rubber band loops or replace them. In addition, we have attached flat clear bags in the frame so you have examination gloves for example, at the ready. All PAX Wasserkuppe rubber band loops are marked either red for circulatory safety materials or blue for airway safety materials. In combination with the inside pockets, which are also marked in colour, this helps implement optimum organisation within your backpack.
More space with two front pockets
The PAX Wasserkuppe L-FT2 offers you two large front pockets. The upper front pocket of the emergency backpack has loops inside the lid and on the sides. You also get two inside pockets “FT” to attach. The lid loops and inside pockets can be used simultaneously. You can use the side loops if you omit at least one inside pocket. The lower front pocket has four loops for infusions and other loops for infusion systems. You can use the PAX Organizing System (POS) and the PAX modules XL or smaller (Ampule Holder, Intubation, Infusion) in combination with the front pockets.
The middle wall sets standards
You receive your PAX Wasserkuppe with our folding, versatile standard middle wall "Intubation". In the body it has different sized rubber bands loops. We have two double rows of loops for venous catheters that you can of course use for whatever you like. The double loop rows fit different packaging sizes. One of the loop rows contains larger loops for sprays, which are important to have quickly accessible.
The middle wall is attached to the body of the Wasserkuppe with snap fasteners. If necessary, you can simply take the middle wall out. For example, to accommodate more inside pockets in your Backpack. This is also a helpful feature for cleaning and disinfecting. To stop the middle wall accidentally coming loose, the snap fasteners can only open in one direction.
The middle wall is made for intubation accessories
When unfolded, the standard middle wall is designed specifically for intubation. Here you have your complete intubation utensils clearly and easily within reach. The endotracheal tube can be placed in protective transparent holders. They are then accessible from both sides and secured against slipping out with a velcro strip. The intubation utensils can be stowed in the variable loops with a separate cover. You will also find suitable loops for the oral pharyngeal and nasopharyngeal airway tubes. The now standard Thomas tube holders and the magill forceps can be stowed individually. The quick access sections hold the fixation and blocker syringe. Use the two-way zipper to access the intubation accessories in the middle wall where everything is safely stowed and yet immediately accessible.
Designed with hands and feet
You can carry your PAX Wasserkuppe sideways or lengthways as we have given it two handgrips. These can be easily disinfected and immediately found thanks to the eye-catching colour. The shoulder straps can be taken off and replaced if they have become so dirty through regular use that washing does not help. Should you ever get stuck somewhere, simply remove the backpack using the buckles.
The firmly riveted feet of the PAX Wasserkuppe give it a good ground clearance, so you can leave your backpack in the dirt. If they wear out, you can either replace the feet yourself or use our repair service. When you fully open the backpack, the zipper goes into a cover made from heavy-duty material. This increases their life and protects them from abrasion.
Unmistakable: Reflective on five sides
Safe is safe: that's why we'll provide the Wasserkuppe with reflective strips on 5 sides. Together with the PAX triangle on the front and on the back, there is an unmistakeable warning effect. The reflective elements are added by a concealed seam. Although this is more complex to manufacture, it significantly increases the lifespan of the safety makers. For the subsequent labelling of your backpack, you can use the five centimetre wide velcro strips on the front. Matching reflective strips can be found in our shop.
The serial number of the PAX-Wasserkuppe Backpacks are always on the upper handle.
Made to use
This product is designed for daily use
PAX Plan is easy to clean. We have to admit, this doesn't sound like having a lot of fun-but for some of you a special hygiene of the PAX bags is very important. Therefore we were looking for a material featuring a possibly plane surface.
It withstands and withstands and withstands and withstands – and withstands! PAX Dura feels at home in any inhospitable area and is extremely uncomplicated. If PAX Dura was a piece of clothing, it would be a blue jeans. (By the way, it feels like that.)
The PAX-Tec material is a mixture of polyester fibers which are extremely resistant against mechanic impulses and polyurethane which is responsible for the smoothness of the fabric. In addition to that it is free of Latex and PVC.