PAX Ampoule holder XL Clip-In POS 2.0
SKU:
The Ampullarium XL Clip-In module is based on the XL module and matches the PAX Organizing System. The PAX Clip-In System is mounted in the bottom and in the lid on the plastic plates and equipped with the PAX ampoule clips as required.
PAX Ampoule holder XL Clip-In POS 2.0
SKU:
The Ampullarium XL Clip-In module is based on the XL module and matches the PAX Organizing System. The PAX Clip-In System is mounted in the bottom and in the lid on the plastic plates and equipped with the PAX ampoule clips as required.
In stock | Delivery time: 3-4
MDR-Product
This product is a medical device according to the European Medical Device Regulation (MDR) (EU) 2017/745. The use of Medical Devices (such) may only be carried out after the required training. I hereby confirm that I belong to the group of medical professionals. *
PAX Ampoule holder XL Clip-In POS 2.0
The PAX ampoule holder XL Clip-In module is based on the XL module and matches the PAX Organizing System. The PAX Clip-In System is mounted in the bottom and in the lid on the plastic plates and equipped with the PAX ampoule clips as required. The middle wall to be fixed in the middle or on the opposite side accommodates the syringes and cannulas and at the same time protects the ampoules at particularly high pressure from the outside. This ampoule kit is equipped with fleece strips. The number of ampoules to be accommodated varies between 40 and 100, depending on the equipment and desired clarity.
Scope of delivery:
- 1x module Ampullarium XL Clip-In POS incl. centre wall
- 2x PAX clip rail frame XL (approx. 306 x 222 mm)
- 8x PAX clip foot, 8x PAX installation foot, incl. screws
- 2x PCI labelling plate XL (approx. 330 x 230 mm)
- 120x PAX clip
- 6x PAX clip rail
- 12x PAX frame clips
Dimensions
| Delivery time days | 3-4 |
|---|---|
| Zubehör | Ampoule Holder |
| Colours | grey |
| Material | PAX-Tec |
| width | 33 cm |
| Height | 24 cm |
| depth | 10 cm |
| Volume | 7,92 l |
Dimensions
Dimensions